Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Design,preparation, and characterization of Fe3O4 nanoparticles encapsulating β-cyclodextrin-bearing guanidine as a highly efficient and reusable heterogeneous base catalyst for synthesis of 3,4-dihydropyrano[3,2-c]chromenes

Chromene substructure is an important structural motif present in a variety of medicines, natural products, and materials showing biological activities. Here, a simple and convenient procedure for the synthesis of 3,4-dihydropyrano[3,2-c]chromene derivatives is described. For this purpose, Fe₃O₄ nanoparticles supported on β-cyclodextrin-guanidine were successfully prepared and used as catalyst. The structure of this catalyst was assigned by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer techniques. The prepared nanocomposites were used as a highly active, heterogeneous, and reusable nanocatalyst for the one-pot, three-component reaction of 4-hydroxycoumarin, aromatic aldehydes, and ethyl cyanoacetate. This method has advantages such as mild conditions, high yields, easy workup and simple purification of products, little catalyst loading, cost efficiency, and reusability of the catalyst.     

Quantification of fenoprofen in human plasma using UHPLC–tandem mass spectrometry for pharmacokinetic study in healthy subjects

A rapid, simple and sensitive ultra-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method has been developed to quantify fenoprofen, a nonsteroidal anti-inflammatory drug in human plasma for a pharmacokinetic study in healthy subjects. Owing to high levels of protein binding, protein precipitation followed by solid-phase extraction was employed for the extraction of fenoprofen and fenoprofen-d3 (used as internal standard) from 200 μL human plasma. Separation was performed on a BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column using methanol−0.2% acetic acid in water (75:25, v/v) under isocratic elution. Electrospray ionization was operated in the negative mode for sample ionization. Ion transitions used for quantification in the selected reaction monitoring mode were m/z 241/197 and m/z 244/200 for fenoprofen and fenoprofen-d3, respectively. Under the optimized conditions, fenoprofen showed excellent linearity in the concentration range 0.02–20 μg/mL (r² ≥ 0.9996), adequate sensitivity, favorable accuracy (96.4–103.7%) and precision (percentage coefficient of variation ≤4.3) with negligible matrix effect. The validated method was successfully applied to a pharmacokinetic study of fenoprofen in healthy subjects. The significant features of the method include higher sensitivity, small plasma volume for processing and a short analysis time.     

Quantitative determination of potential genotoxic impurity 3-aminopyridine in linagliptin active pharmaceutical ingredient using HILIC–UV

This study aimed to develop an analytical method to determine the quantity of the impurity 3-aminopyridine (3AP). 3-Aminopyridine is a reactive reagent in the synthesis of linagliptin. The method was sensitive at level of 30.0 ppm of 3AP relative to linagliptin. The analysis was carried out using hydrophilic interaction liquid chromatography. The analytical column was Tracer Extrasil Silica (150 × 4.0 mm, 3 μm). A mobile phase of water–acetonitrile (10:90, v/v) containing 10.0 mM ammonium acetate was prepared and adjusted to pH 6.0. A UV detector was used to detect the amount of 3AP at a wavelength of 298 nm. Validation of the method was performed as per the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use in terms of detection limit, quantitation limit, linearity, accuracy, precision, specificity and robustness. The calibration curve was linear (r² = 0.999) for 3AP concentration in the range of 30.0–450.0 ppm. This method showed a good sensitivity with a detection limit and a quantitation limit of 7.5 and 25.0 ppm, respectively.     

Optimization of extraction and quantification technique for phenolics content of garlic (Allium sativum): An application for comparative phytochemical evaluation based on cultivar origin

A range of conventional, i.e. maceration, percolation, ultrasonic assisted, Soxhlet and Soxtec extraction (STE), to advanced extraction techniques of accelerated solvent extraction (ASE) was utilized for the first time in order to optimize the extract yield and recovery of phenolics—gallic acid (GA), rutin (RT) and quercetin (QT)—quantified via ultra-high performance liquid chromatography with diode array detector (UHPLC–DAD). The effect of solvents (n-hexane, dichloromethane and methanol) and temperature (60, 80 and 100°C) upon extraction yield, phenolic content and antioxidant activity (DPPH, ABTS and DPPH) was studied, and the method was validated in commercial food samples from Saudi Arabia, China and India. A high extract yield with percentage recovery was observed for STE (1221.10 mg/5 g; 24.42%) and ASE techniques (91.50 mg/1 g; 9.15%) in methanol at 100°C. UHPLC–DAD showed retention times (min) of 0.67, 1.93 and 1.90 for GA, RT and QT, respectively in the shortest runtime of 3 min. The yield for phenolics was higher for STE/ASE (ppm): 15.27/15.29 (GA), 85.24/37.56 (RT) and 52.20/33.40 (QT), respectively. In terms of antioxidant activities, low IC₅₀ values (μg/ml) of 1.09/1.18 (DPPH), 2.11/5.32 (ABTS) and 4.35/7.88 (phenazine methosulfate–nicotinamide adenine dinucleotide) were observed for STE and ASE, respectively. Multivariate analysis for STE showed a significant (P = 0.000) correlation for extraction type vs. extract yield and phenolics content; however, there was no significance for antioxidant activities vs. extraction type. ASE showed a positive correlation for solvent vs. extraction yield, phenolics and antioxidant activity; however, there was no correlation for extraction yield and DPPH activity. Principal component analysis for STE showed a major variability (52.02%) for extraction yield and phenolics in PC1 followed by PC2 (38.30%) for antioxidant activities. For ASE, PC1 (48.68%) showed a positive correlation for solvent vs. extraction yield and phenolics while PC2 (33.12%) showed a positive correlation for temperature and antioxidant activities. STE and ASE were the optimized extraction techniques for the garlic food sample while a significant effect of solvent and temperature was observed upon extraction yield, phenolics and antioxidant activity.     

新型共价交联纳米胶囊的构筑、调控与功能

利用共价自组装的方法，将刚性组装基元与柔性链在一定条件下进行横向交联，可以方便地制备出单层高分子纳米胶囊.相比于传统的非共价超分子囊泡，这种新型的共价纳米胶囊具有结构稳定、尺度可控且分散性优异等诸多优点.因此，如何利用化学合成的手段来制备新型的纳米胶囊，并进一步实现对其结构调控和性能的探究具有十分重要的意义.针对这些问题，分别发展了功能化的柱[5]芳烃、四苯乙烯、卟啉、三嗪、苯硼酸酐等不同类型构筑基元，并使之与两端具有活性位点的柔性烷基链在适当的溶剂中进行聚合反应，最终获得了一系列的共价纳米胶囊.通过对其结构的修饰和调控，发现这些功能化的高分子纳米胶囊在光捕获、人工酶、抗菌材料以及药物载体等领域具有诸多潜在应用价值.未来，新型共价高分子纳米胶囊的开发、功能化以及应用有望得到进一步的拓展.     

Zn–Co Sulfide Microflowers Anchored on Three-Dimensional Graphene: A High-Capacitance and Long-Cycle-Life Electrode for Asymmetric Supercapacitors

Zinc–cobalt double-metal sulfides (ZCS) as Faradic electrode materials with high energy density have great potential for supercapacitors, but their poor transfer efficiency for electrons and ions hinders their electrochemical response. Herein, ZnCo₂(CO₃)_1.5(OH)₃@ZCS microflower hybrid arrays consisting of thin nanolayer petals were anchored on three-dimensional graphene (ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG) by a simple hydrothermal method and additional ion-exchange process. A ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode delivered high capacitance (2228 F g⁻¹ at 1 A g⁻¹) and long cycling life (85.7 % retention after 17 000 cycles), which are ascribed to the multicomponent structural design. The 3DG conductive substrate improves the electron-transfer dynamics of the electrode material. Meanwhile, the microflowers consisting of thin nanolayer petals could not only provide many active sites for ions to improve the capacitance, but also alleviate the volume expansion to ensure the structural stability. Furthermore, an all-solid-state asymmetric supercapacitor based on a ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode achieved a high energy density of 27 W h kg⁻¹ at 528.3 W kg⁻¹ and exhibits exceptional cyclic stability for 23 000 cycles. Its ability to light a blue LED for 9 min verified the feasibility of its application for energy storage devices.     

Micro/Nanoengineered α-Fe2O3 Nanoaggregate Conformably Enclosed by Ultrathin N-Doped Carbon Shell for Ultrastable Lithium Storage and Insight into Phase Evolution Mechanism

The Fe-based transition metal oxides are promising anode candidates for lithium storage considering their high specific capacity, low cost, and environmental compatibility. However, the poor electron/ion conductivity and significant volume stress limit their cycle and rate performances. Furthermore, the phenomena of capacity rise and sudden decay for α-Fe₂O₃ have appeared in most reports. Here, a uniform micro/nano α-Fe₂O₃ nanoaggregate conformably enclosed in an ultrathin N-doped carbon network (denoted as M/N-α-Fe₂O₃@NC) is designed. The M/N porous balls combine the merits of secondary nanoparticles to shorten the Li⁺ transportation pathways as well as alleviating volume expansion, and primary microballs to stabilize the electrode/electrolyte interface. Furthermore, the ultrathin carbon shell favors fast electron transfer and protects the electrode from electrolyte corrosion. Therefore, the M/N-α-Fe₂O₃@NC electrode delivers an excellent reversible capacity of 901 mA h g⁻¹ with capacity retention up to 94.0 % after 200 cycles at 0.2 A g⁻¹. Notably, the capacity rise does not happen during cycling. Moreover, the lithium storage mechanism is elucidated by ex situ XRD and HRTEM experiments. It is verified that the reversible phase transformation of α↔γ occurs during the first cycle, whereas only the α-Fe₂O₃ phase is reversibly transformed during subsequent cycles. This study offers a simple and scalable strategy for the practical application of high-performance Fe₂O₃ electrodes.     

平板几何迁移算子的特征值问题

研究L^p(1相似文献